Wedded Bliss for Something Blue

This is the last week of the wedding theme sayings over at Mixed Media Monday and since I have done nothing with a wedding theme I did this little wedding card. I also did this one because I wanted to share a technique I have been playing with. Crackle paint can be so expensive but this is a Fun inexpensive alternative to crackle paint and glaze.

This easy technique is done with cheap Elmer's school glue ...really any cheap white glue works, I even tried the stuff from the dollar store. I discovered glue crackle on the internet but found the explanations very limited. I not only wanted to crackle paint for backgrounds but I also wanted to crackle clear glaze to use on my images. As hard as I searched I found nothing on crackling clear glaze.... sooo I did a lot of experimenting with different glues and glazes and found that the cheep white school glue works best for this technique. There is no difference if you use the clear or white. Most any water based glue will work however Mod Podge doesn’t work at all

To crackle paint:
Step1.
Using acrylic paint, choose the color you would like your cracks to be and paint the surface of your project. Let it dry completely. This works on wood metal paper and even cloth. If your doing this on paper you can just use unpainted card stock in the color of choice so just skip this first step.

Step 2.
Cover the painted surface with glue. The thickness of the glue will determine the size of your cracks. A thin glue layer will result in a fine crack, the thicker the glue the larger and wider the crack. For a very fine crack it is best to thin the glue a bit. I found using my hands worked better than a brush for spreading on the glue. You have to work fast... I got a more even coverage and I was able to control the thickness of the glue much easier. It also eliminated brush marks.

Step 3.
Do not let the glue dry completely. It must still be tacky if you want it to crack. For thin glue let it dry about 3 minutes and for the thicker glue about 5 to 8 minutes. Once tacky cover the surface with Acrylic paint. Again I found using my hands worked best. The cracking starts pretty quickly and it is really fun to watch.

For a clear crackle over an image
Step1.
It is done much the same, cover the printed surface with glue. I used a lazer print. I think the ink would run with an ink jet image. Again, the thickness of the glue will determine the size of your cracks. A thin glue layer will result in a fine crack, the thicker the glue the larger and wider the crack.

Step 2
Once the glue is tacky, paint on a clear water base varnish. I used the Delta Ceramcoat satin interior varnish. I also tried several others and they all worked well.

I enhanced the cracks for my example because they did not show up great in a photo. However on a small image with a face your cracks may not look so great enhanced. I had to do the image above several times before I had an image where the bride did not look like she was crying ...lol. In real life the cracks are really visible without any enhancement.