Thursday, December 11, 2014

DIY Book Page Poinsettias Free Pattern And Tutorial

I have been making some Christmas crafts myself too! along with being busy making some new ornaments, I needed something for the top of the tree. I decided I wanted to make some book page poinsettias to match the new book page honeycomb ornaments but every pattern that I found had perfect little petals and natural poinsettias just don't look like I just made one.

Even though a natural poinsettia doesn't have book page print on them I still wanted them to have a natural shape :))
There is a link for the pattern below. This is what I came up with. 

Once it was completed I sprayed it with alcohol ink to give it an aged look. I liked it so well that I am doing some not just for the top but for the whole tree. I also tried one in red but I think I like the first one the best. I still have to get some beads to go in the centers. I will put them on a wire so they can just be stuck in the center. That way they can be removed so that they can be folded flat for storage. They are fast and easy and will keep from year to year... so go ahead and make a bunch! 

You will need: 
Old paper back books or sheet music... you could also print my Christmas news print that I did for the advent calendar. I am sure they would look good with what ever you choose. 

You can use my pattern or just cut some shapes you like yourself. Cut 15 petals, five for each layer of staggering sizes. If your making your own, start with that perfect petal shape and then cut some notches and waves into them. Make sure you leave two perfect leaves for each layer.  

I then used the coated lightweight jewelers wire. I did not have any floral wire and I thought that raw wire might discolor in time. However you could use either one. 
Lay each leaf on a glass surface or something that hot glue will not damage and put a dot of glue on the point of the leaf. 
Lay the wire onto the dot of glue so that one end will reach about three fourths down the length of the leaf. Also make sure you have about six inches of wire for the "stem" Then lay your glue gun kinda on its side and use the side of the hot tip of the glue gun to spread the dot down the wire. This takes a little practice but you'll soon get the hang of it. Do this with each petal. 

If your going to add glitter, do it now. It is just about impossible to add the glitter once the flower is assembled. 

To assemble the flower start with the five smallest petals and twist the wires three or four turns so that they hold together. Then arrange the second row just below that and twist three or four turns again. Now you've got the hang of it :)) so do the same for the third row, only this time twist all the wires together all the way down and wrap with floral tape. I used brown but if your doing red poinsettias you might want to use green. If you want to put them in a vase you could make a few larger ones to put further down on the stem. Just spritz them green. 

Spritz with alcohol ink and glitter spray if you like or leave them to age naturally. 

Feel free to pin the thumb above but please do not pin the pattern download. I would like everyone to stop by here to download it so they don't miss the instructions and all my other fun free downloads.


Ann said...

They are beautiful and thank you for the pattern. I hope you have a very Merry Christmas.

Susan Salyer said...

let me say how beautiful they are wow! and thank you.

Joan Von Metzinger said...

Thanks heaps for the template. .. I'm doing mason jars for Kidney kids
As a fundraiser and making flowers isn't my thing and this is so
helpfulšŸ˜Š We will have heaps of wonderful options thanks to your
gorgeous templatešŸ˜Š